Configuring An Access Betoken Every Mo An Access Point

The Linksys Wireless-G Access Points tin sack hold out configured equally an Access Point, Access Point Client, Wireless Repeater, too Wireless Bridge.  Wireless-G Access Points past times default are educate to Access Point Mode.
NOTE:  The AP Mode options on the access betoken depend on its version number. 

Checking if the WAP54G v1.1 is educate to Access Point Mode 

Step 1:
Log on to the access point's web-based setup page.  For instructions, click here.
NOTE:  If y'all are using Mac to access the access point’s web-based setup page, click here.
Step 2:
When the access point’s web-based setup page opens, click AP Mode too brand certain Access Point (default) is selected.

                 

NOTE: If the WAP54G v1.1 is non educate to Access Point, choose Access Point (default) too then click Apply.
Step 3:
Click Apply if y'all made whatsoever changes.

Checking if the WAP54G v3 is educate to Access Point Mode
Step 1:
Connect the Linksys access betoken to i of the router's Ethernet (1, 2, three or 4) ports.
Step 2:
Access the web-based setup page.  For instructions, click here.
NOTE:  If y'all are using Mac to access the access point’s web-based setup page, click here.
Step 3:
When the access point’s web-based setup page appears, click AP Mode and brand certain that Access Point (default) is selected.

QUICK TIP:  When configuring the access betoken inward AP mode, brand certain likewise its wireless settings are the same amongst the router.  To banking venture lucifer the wireless settings of your Linksys access point, click here.
Step 4:
Click  if y'all made whatsoever changes.