1. Which of the next are required when adding a network to the OSPF routing procedure ? configuration (Choose three.)
network address
loopback address
autonomous organization number
subnet mask
wildcard mask
area ID
network address
loopback address
autonomous organization number
subnet mask
wildcard mask
area ID
2. Which of the next are primary functions of a router? (Choose two.)
packet switching
microsegmentation
domain yell resolution
path selection
flow control
packet switching
microsegmentation
domain yell resolution
path selection
flow control
3. Refer to the routing tabular array shown inward the exhibit. What is the pregnant of the highlighted value 192?
It is the value assigned past times the Dijkstra algorithm that designates the number of hops inward the network.
It is the value used past times the DUAL algorithm to decide the bandwidth for the link.
It is the metric, which is cost.
It is the administrative distance.
It is the value assigned past times the Dijkstra algorithm that designates the number of hops inward the network.
It is the value used past times the DUAL algorithm to decide the bandwidth for the link.
It is the metric, which is cost.
It is the administrative distance.
4. Which 3 statements are truthful regarding the encapsulation in addition to de-encapsulation of packets when traveling through
a router? (Choose three.)
The router modifies the TTL field, decrementing it past times one.
The router changes the source IP to the IP of the go out interface.
The router maintains the same source in addition to goal IP.
The router changes the source physical address to the physical address of the go out interface.
The router changes the destination IP to the IP of the go out interface.
The router sends the parcel out all other interfaces, also the 1 it entered the router on.
a router? (Choose three.)
The router modifies the TTL field, decrementing it past times one.
The router changes the source IP to the IP of the go out interface.
The router maintains the same source in addition to goal IP.
The router changes the source physical address to the physical address of the go out interface.
The router changes the destination IP to the IP of the go out interface.
The router sends the parcel out all other interfaces, also the 1 it entered the router on.
Refer to the exhibit. Which path volition traffic from the 172.16.1.0/24 network accept to acquire to the 10.0.0.0/24 network?
ADC
ABC
It volition charge residuum the traffic betwixt ADC in addition to ABC
It volition post the traffic via ABC, in addition to volition work ADC equally a backup path solely when ABC fails.
ADC
ABC
It volition charge residuum the traffic betwixt ADC in addition to ABC
It volition post the traffic via ABC, in addition to volition work ADC equally a backup path solely when ABC fails.
5. What is the purpose of the TTL acre inside an IP parcel header?
clears an unreachable route from the routing tabular array afterwards the invalid timer expires
prevents regular update messages from inappropriately reinstating a route that may have got gone bad
removes an unreachable route from the routing tabular array afterwards the level timer expires
limits the catamenia of fourth dimension or number of hops a parcel tin give notice traverse through the network earlier it should hold out discarded
used to score the route equally unreachable inward a routing update that is sent to other routers
clears an unreachable route from the routing tabular array afterwards the invalid timer expires
prevents regular update messages from inappropriately reinstating a route that may have got gone bad
removes an unreachable route from the routing tabular array afterwards the level timer expires
limits the catamenia of fourth dimension or number of hops a parcel tin give notice traverse through the network earlier it should hold out discarded
used to score the route equally unreachable inward a routing update that is sent to other routers
6. Refer to the exhibit. How many routes are both degree 1 in addition to qualify for work equally an ultimate route?
1
2
3
4
5
6
1
2
3
4
5
6
7. Refer to the exhibit. Cost for each path are shown. If all routers are configured to work OSPF, what would hold out the path of a parcel sent from Router C to Router D if Router Influenza A virus subtype H5N1 was down?
C-B-E-D
C-B-A-D
C-F-E-D
C-F-B-A-D
C-F-E-A-D
C-B-E-D
C-B-A-D
C-F-E-D
C-F-B-A-D
C-F-E-A-D
8. Refer to the exhibit. Routers 1 in addition to 2 are straight connected over a series link. Pings are failing betwixt the 2 routers. What alter past times the administrator volition right the problem?
Set the encapsulation on both routers to PPP.
Decrease the bandwidth on Serial 0/1/0 on router 2 to 1544.
Change the cable that connects the routers to a crossover cable.
Change the IP address on Serial 0/1/0 on router 2 to 192.168.0.1/30.
Set the encapsulation on both routers to PPP.
Decrease the bandwidth on Serial 0/1/0 on router 2 to 1544.
Change the cable that connects the routers to a crossover cable.
Change the IP address on Serial 0/1/0 on router 2 to 192.168.0.1/30.
9. Refer to the exhibit. Influenza A virus subtype H5N1 network administrator is trying to decide why router JAX has no OSPF routes inward its routing table. All routers are configured for OSPF expanse 0. From the JAX router, the administrator is able to ping its connected interfaces in addition to the Fa0/1 interface of the ORL router simply no other router interfaces. What is a logical pace that the network administrator should accept to troubleshoot the problem?
Reboot the routers.
Change the OSPF procedure ID on all of the routers to 0.
Check to come across if the cable is unloosen betwixt ORL in addition to JAX.
Check to come across if CDP packets are passing betwixt the routers.
Use Show in addition to debug commands to decide if hellos are propagating
Reboot the routers.
Change the OSPF procedure ID on all of the routers to 0.
Check to come across if the cable is unloosen betwixt ORL in addition to JAX.
Check to come across if CDP packets are passing betwixt the routers.
Use Show in addition to debug commands to decide if hellos are propagating
10. Refer to the exhibit. Which summarization should R1 work to advertise its networks to R2?
192.168.1.0/24
192.168.0.0/24
192.168.0.0/22
192.168.1.0/22
192.168.1.0/24
192.168.0.0/24
192.168.0.0/22
192.168.1.0/22
11. Influenza A virus subtype H5N1 router boots in addition to enters setup mode. What is the argue for this?
The IOS ikon is corrupt.Cisco IOS is missing from flash memory.
The configuration file is missing from NVRAM.
The POST procedure has detected hardware failure.
The IOS ikon is corrupt.Cisco IOS is missing from flash memory.
The configuration file is missing from NVRAM.
The POST procedure has detected hardware failure.
12. Refer to the exhibit. R1 is configured properly for a unmarried expanse OSPF, in addition to R2 has been late installed inward the network. Which laid of commands is required to configure a unmarried expanse OSPF for the networks that are connected to R2?
R2(config)# router ospf 1
R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0
R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 0
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config)# router ospf 2 R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 0
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 1
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config-router)# network 10.0.0.0 0.0.0.3 expanse 1
R2(config)# router ospf 1
R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0
R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 0
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config)# router ospf 2 R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 0
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config-router)# network 10.1.1.0 0.0.0.3 expanse 1
R2(config)# router ospf 1 R2(config-router)# network 192.168.2.0 0.0.0.255 expanse 0 R2(config-router)# network 10.0.0.0 0.0.0.3 expanse 1
13. Refer to the exhibit. Routers R1 in addition to R2 are straight connected via their series interfaces in addition to are both running the EIGRP routing protocol. R1 in addition to R2 tin give notice ping the straight connected series interface of their neighbor, simply they cannot shape an EIGRP vecino adjacency.
What activeness should hold out taken to solve this problem?
Enable the series interfaces of both routers.
Configure EIGRP to post periodic updates.
Configure the same hi interval betwixt the routers.
Configure both routers alongside the same EIGRP procedure ID
What activeness should hold out taken to solve this problem?
Enable the series interfaces of both routers.
Configure EIGRP to post periodic updates.
Configure the same hi interval betwixt the routers.
Configure both routers alongside the same EIGRP procedure ID
14. Refer to the exhibit. The hosts that are connected to R2 are unable to ping the hosts that are connected to R1. How tin give notice this job hold out resolved?
Configure the router ID on both routers.
Configure the R2 router interfaces for expanse 0.
Configure a loopback interface on both routers.
Configure the proper subnet masks on the router interfaces.
Configure the router ID on both routers.
Configure the R2 router interfaces for expanse 0.
Configure a loopback interface on both routers.
Configure the proper subnet masks on the router interfaces.
15. In a lab show environment, a router has learned nearly network 172.16.1.0 through iv dissimilar dynamic routing processes. Which route volition hold out used to accomplish this network?
D 172.16.1.0/24 [90/2195456] via 192.168.200.1, 00:00:09, Serial0/0/0
O 172.16.1.0/24 [110/1012] via 192.168.200.1, 00:00:22, Serial0/0/0
R 172.16.1.0/24 [120/1] via 192.168.200.1, 00:00:17, Serial0/0/0
I 172.16.1.0/24 [100/1192] via 192.168.200.1, 00:00:09, Serial0/0/0
D 172.16.1.0/24 [90/2195456] via 192.168.200.1, 00:00:09, Serial0/0/0
O 172.16.1.0/24 [110/1012] via 192.168.200.1, 00:00:22, Serial0/0/0
R 172.16.1.0/24 [120/1] via 192.168.200.1, 00:00:17, Serial0/0/0
I 172.16.1.0/24 [100/1192] via 192.168.200.1, 00:00:09, Serial0/0/0
16. Which tilt is truthful nearly the metrics used past times routing protocols?
A metric is a value used past times a item routing protocol to compare paths to remote networks.
A mutual metric is used past times all routing protocols.
The metric alongside the highest value is installed inward the routing table.
The router may work solely 1 parameter at a fourth dimension to calculate the metric
A metric is a value used past times a item routing protocol to compare paths to remote networks.
A mutual metric is used past times all routing protocols.
The metric alongside the highest value is installed inward the routing table.
The router may work solely 1 parameter at a fourth dimension to calculate the metric
17. Refer to the exhibit. Both routers are using the RIPv2 routing protocol in addition to static routes are undefined. R1 tin give notice ping
192.168.2.1 in addition to 10.1.1.2, simply is unable to ping 192.168.4.1.
What is the argue for the ping failure?
The series interface betwixt 2 routers is down.
R2 is non forwarding the routing updates.
The 192.168.4.0 network is non included inward the RIP configuration of R2.
RIPv1 needs to hold out configured.
192.168.2.1 in addition to 10.1.1.2, simply is unable to ping 192.168.4.1.
What is the argue for the ping failure?
The series interface betwixt 2 routers is down.
R2 is non forwarding the routing updates.
The 192.168.4.0 network is non included inward the RIP configuration of R2.
RIPv1 needs to hold out configured.
18. Which 2 statements are truthful nearly the EIGRP successor route? (Choose two.)
It is saved inward the topology tabular array for work if the primary route fails.
It may hold out backed upwards past times a viable successor route.
It is used past times EIGRP to frontwards traffic to the destination.
It is flagged equally active inward the routing table.
After the regain procedure has occurred, the successor route is stored inward the vecino table
It is saved inward the topology tabular array for work if the primary route fails.
It may hold out backed upwards past times a viable successor route.
It is used past times EIGRP to frontwards traffic to the destination.
It is flagged equally active inward the routing table.
After the regain procedure has occurred, the successor route is stored inward the vecino table
19. Refer to the exhibit. Hosts on the 192.168.1.0 network cannot communicate alongside hosts on the 172.16.1.1 network. The network administrator has run theshow ip route command on R1. What could hold out the drive of this problem?
The FastEthernet interface on R1 is disabled.
Autosummarization is enabled on R1.
The series interface S0/0/0 of R1 is administratively down.
No static route or routing protocol is configured.
The FastEthernet interface on R1 is disabled.
Autosummarization is enabled on R1.
The series interface S0/0/0 of R1 is administratively down.
No static route or routing protocol is configured.
20. Which tilt correctly describes a characteristic of RIP?
RIP is a link-state routing protocol.
RIP uses solely 1 metric—hop count— for path selection.
Advertised routes alongside hop counts greater than 10 are unreachable.
Messages are broadcast every 10 seconds
RIP is a link-state routing protocol.
RIP uses solely 1 metric—hop count— for path selection.
Advertised routes alongside hop counts greater than 10 are unreachable.
Messages are broadcast every 10 seconds
21. Refer to the exhibit. Which 2 statements are truthful based on the exhibited output? (Choose two.)
All routes are stable.
Each route has 1 viable successor.
The series interface betwixt the 2 routers is down.
The administrative distance of EIGRP has been laid to 50.
The demonstrate ip eigrp topology command has been run on R1.
All routes are stable.
Each route has 1 viable successor.
The series interface betwixt the 2 routers is down.
The administrative distance of EIGRP has been laid to 50.
The demonstrate ip eigrp topology command has been run on R1.
22. Influenza A virus subtype H5N1 network administrator is analyzing routing update demeanour on a network that has both EIGRP in addition to OSPF
configured on all routers. Both protocols seem inward the output of demonstrate ip protocols. However, solely EIGRP internal
routes seem inward the routing tables. Which tilt correctly explains the scenario?
The OSPF protocol has a higher toll than EIGRP.
The EIGRP protocol has a lower metric than OSPF.
The EIGRP protocol was configured showtime on the router.
The EIGRP protocol has a lower administrative distance than OSPF
configured on all routers. Both protocols seem inward the output of demonstrate ip protocols. However, solely EIGRP internal
routes seem inward the routing tables. Which tilt correctly explains the scenario?
The OSPF protocol has a higher toll than EIGRP.
The EIGRP protocol has a lower metric than OSPF.
The EIGRP protocol was configured showtime on the router.
The EIGRP protocol has a lower administrative distance than OSPF
23. Which prompt is used to allow a user to alter the IP address of an interface on a router?
Router>
Router#
Router(config)#
Router(config-if)#
Router>
Router#
Router(config)#
Router(config-if)#
24. Refer to the exhibit. Routers RTRA in addition to RTRB are running OSPF. What entry does RTRA add together inward the routing table
when Serial 0/0/0 receives an update nearly the network that is attached to RTRB?
O 172.16.7.0/30 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.7.16/28 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.7.0/24 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.0.0/16 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
when Serial 0/0/0 receives an update nearly the network that is attached to RTRB?
O 172.16.7.0/30 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.7.16/28 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.7.0/24 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
O 172.16.0.0/16 [110/51] via 10.10.10.2, 00:00:25, Serial0/0/0
25. Which additional slice of information is included inward the updates of classless routing protocols to back upwards the work of VLSM in addition to discontiguous networks?
metric
network mask
neighbor router ID
administrative distance
metric
network mask
neighbor router ID
administrative distance
26. Because of a topology change, the side past times side hop IP address inward the electrical flow static route must hold out reconfigured. How tin give notice a static route entry hold out altered to conform a topology change?
Keep the existing static route in addition to configure a novel static route alongside the right side past times side hop IP address.
Negate the existing static route in addition to configure a novel static route alongside the right side past times side hop IP address.
Do nothing. The existing static route volition automatically update the side past times side hop entry alongside the novel IP address.
Keep the existing static route, reload the router, in addition to configure a novel static route alongside the right side past times side hop IP address
Keep the existing static route in addition to configure a novel static route alongside the right side past times side hop IP address.
Negate the existing static route in addition to configure a novel static route alongside the right side past times side hop IP address.
Do nothing. The existing static route volition automatically update the side past times side hop entry alongside the novel IP address.
Keep the existing static route, reload the router, in addition to configure a novel static route alongside the right side past times side hop IP address
27. Which router agency is accessed past times entering the enable command?
user EXEC
privileged EXEC
global configuration
interface configuration
user EXEC
privileged EXEC
global configuration
interface configuration
28. Refer to the exhibit. An administrator is attempting to configure a router past times copying in addition to pasting the commands that are shown inward the exhibit. However, solely 1 of the FastEthernet interfaces is coming up. What is the problem?
Both interfaces are inward the same IP subnet.
FastEthernet0/1 does non have got a description.
There tin give notice hold out solely 1 FastEthernet interface enabled on a router at 1 time.
The administrator did non go out to global configuration agency earlier configuring FastEthernet0/1
Both interfaces are inward the same IP subnet.
FastEthernet0/1 does non have got a description.
There tin give notice hold out solely 1 FastEthernet interface enabled on a router at 1 time.
The administrator did non go out to global configuration agency earlier configuring FastEthernet0/1
29. In an exam of 2 OSPF routers that neglect to central information, it is determined that they have got non perish OSPF neighbors. Which 2 configuration values must gibe for the OSPF routers to perish neighbors?
neighbor ID in addition to router ID
dead fourth dimension in addition to hi time
OSPF expanse in addition to vecino ID
OSPF expanse in addition to interface priority
neighbor ID in addition to router ID
dead fourth dimension in addition to hi time
OSPF expanse in addition to vecino ID
OSPF expanse in addition to interface priority
30. Refer to the exhibit. Routers R1 in addition to R3 work dissimilar routing protocols alongside default administrative distance values. All devices are properly configured in addition to the goal network is advertised past times both protocols. Which path volition hold out used to transmit the information packets from PC1 to PC2?
The packets volition locomote via R2-R1.
The packets volition locomote via R2-R3.
The traffic volition hold out load-balanced betwixt 2 paths — via R2-R1 in addition to via R2-R3.
The packets volition locomote via R2-R3, in addition to the other path via R2-R1 volition hold out retained equally the backup path
The packets volition locomote via R2-R1.
The packets volition locomote via R2-R3.
The traffic volition hold out load-balanced betwixt 2 paths — via R2-R1 in addition to via R2-R3.
The packets volition locomote via R2-R3, in addition to the other path via R2-R1 volition hold out retained equally the backup path
31. Refer to the exhibit. The network administrator has run the next command on R1. R1(config)# ip route 192.168.2.0 255.255.255.0 172.16.1.2 What is the number of running this command?
Traffic for network 192.168.2.0 is forwarded to 172.16.1.2.
This route is automatically propagated throughout the entire network.
Traffic for all networks is forwarded to 172.16.1.2.
The command invokes a dynamic routing protocol for 192.168.2.0
Traffic for network 192.168.2.0 is forwarded to 172.16.1.2.
This route is automatically propagated throughout the entire network.
Traffic for all networks is forwarded to 172.16.1.2.
The command invokes a dynamic routing protocol for 192.168.2.0
32. Why is fast convergence desirable inward networks that work dynamic routing protocols?
Hosts are unable to access their gateway until the network is converged.
Routers volition non allow packets to hold out forwarded until the network is converged.
Routers may brand wrong forwarding decisions until the network has converged.
Routers volition non allow configuration changes to hold out made until the network has converged
Hosts are unable to access their gateway until the network is converged.
Routers volition non allow packets to hold out forwarded until the network is converged.
Routers may brand wrong forwarding decisions until the network has converged.
Routers volition non allow configuration changes to hold out made until the network has converged
33. Which 2 statements nearly routing protocols are accurate? (Choose two.)
OSPF supports VLSM.
RIPv1 supports VLSM.
RIPv2 does non have got a hop count limit.
EIGRP supports discontiguous network designs.
RIPv2 does non back upwards discontiguous network designs
OSPF supports VLSM.
RIPv1 supports VLSM.
RIPv2 does non have got a hop count limit.
EIGRP supports discontiguous network designs.
RIPv2 does non back upwards discontiguous network designs
34. Refer to the exhibit. If the EIGRP routing protocol is used throughout the network, which IP address in addition to mask prefix
should hold out sent past times router R1 to the Edge router equally a number of manual summarization of LANs A, B, C, in addition to D?
192.168.4.0/20
192.168.4.0/22
192.168.4.0/24
192.168.4.0/26
should hold out sent past times router R1 to the Edge router equally a number of manual summarization of LANs A, B, C, in addition to D?
192.168.4.0/20
192.168.4.0/22
192.168.4.0/24
192.168.4.0/26
35. Refer to the exhibit. Which solution provides the most efficient work of router resources for forwarding traffic betwixt BR in addition to HQ?
RIP
RIPv2
EIGRP
static routes
RIP
RIPv2
EIGRP
static routes
36. Refer to the exhibit. The network is configured alongside RIPv2. However, network administrators notice that communication cannot hold out successfully completed from 1 LAN to another. Influenza A virus subtype H5N1 network administrator issues the demonstrate ip route command on the HQ router. Based on the output, what should hold out done to right the problem?
Disable the charge balancing characteristic of RIPv2.
Issue the no auto-summary command for RIPv2.
Replace RIPv2 alongside EIGRP which supports VLSM.
Make certain that the network statements include the right subnet mask
Disable the charge balancing characteristic of RIPv2.
Issue the no auto-summary command for RIPv2.
Replace RIPv2 alongside EIGRP which supports VLSM.
Make certain that the network statements include the right subnet mask
37. Which protocol is used past times EIGRP to deliver in addition to have update packets?
FTP
RTP
TCP
TFTP
UDP
FTP
RTP
TCP
TFTP
UDP
38. Which multicast address does EIGRP work to post hi in addition to updates packets?
224.0.0.5
224.0.0.6
224.0.0.9
224.0.0.10
224.0.0.5
224.0.0.6
224.0.0.9
224.0.0.10
39. Influenza A virus subtype H5N1 network administrator is using an application that is monitoring packets on the network in addition to sees an EIGRP update packet. What is the purpose of the update packet?
The parcel is sent to regain neighbors inside the EIGRP network.
The parcel is sent to search for network devices inside an EIGRP network.
The parcel is used to propagate routing information inside the EIGRP network.
The parcel is used to post an unreachable respond to about other router inside the EIGRP network.
The parcel is used to notify all routers that EIRGP has failed on 1 of the routers inside the EIGRP network
The parcel is sent to regain neighbors inside the EIGRP network.
The parcel is sent to search for network devices inside an EIGRP network.
The parcel is used to propagate routing information inside the EIGRP network.
The parcel is used to post an unreachable respond to about other router inside the EIGRP network.
The parcel is used to notify all routers that EIRGP has failed on 1 of the routers inside the EIGRP network
40. Refer to the exhibit. What OSPF network statements are required for the router B to advertise the 3 networks that are attached?
router ospf 1 network 10.0.0.0 0.0.0.255 expanse 0
router ospf 1 network 10.1.1.0 0.3.255.255 expanse 0 network 10.10.1.0 0.255.255.255 expanse 0 network 10.20.1.0 0.255.255.255 expanse 0
router ospf 1 network 10.1.1.0 0.0.0.3 expanse 0 network 10.10.1.0 0.0.255.255 expanse 0 network 10.20.1.0 0.0.255.255 expanse 0
router ospf 1 network 10.1.1.0 0.0.0.3 expanse 0 network 10.10.1.0 0.0.0.255 expanse 0 network 10.20.1.0 0.0.0.255 expanse 0
router ospf 1 network 10.0.0.0 0.0.0.255 expanse 0
router ospf 1 network 10.1.1.0 0.3.255.255 expanse 0 network 10.10.1.0 0.255.255.255 expanse 0 network 10.20.1.0 0.255.255.255 expanse 0
router ospf 1 network 10.1.1.0 0.0.0.3 expanse 0 network 10.10.1.0 0.0.255.255 expanse 0 network 10.20.1.0 0.0.255.255 expanse 0
router ospf 1 network 10.1.1.0 0.0.0.3 expanse 0 network 10.10.1.0 0.0.0.255 expanse 0 network 10.20.1.0 0.0.0.255 expanse 0
41. Refer to the exhibit. Why is the the world of the serial0/0/0 interface administratively down?
An IP address has non been configured on the interface.
The WIC was installed into the wrong slot on the router.
The default encapsulation on the interface has been modified.
The no shutdown command has non been executed on the interface
An IP address has non been configured on the interface.
The WIC was installed into the wrong slot on the router.
The default encapsulation on the interface has been modified.
The no shutdown command has non been executed on the interface
42. On a router, which 3 components are stored inward RAM? (Choose three.)
POST code
the routing table
the running-configuration
the start-up configuration
the bootstrap instructions
a re-create of the operating system
POST code
the routing table
the running-configuration
the start-up configuration
the bootstrap instructions
a re-create of the operating system
43. Refer to the exhibit. RouterA in addition to RouterB cannot successfully central EIGRP routes. What is the problem?
The hi intervals produce non match.
The autonomous organization numbers produce non match.
The no auto-summary command is missing from both routers.
The ip bandwidth-percent command is missing from RouterB
The hi intervals produce non match.
The autonomous organization numbers produce non match.
The no auto-summary command is missing from both routers.
The ip bandwidth-percent command is missing from RouterB
44. Refer to the exhibit. What is the purpose of the ip bandwidth-percent eigrp fifty 10 command?
to boundary the bandwidth EIGRP packets tin give notice work to 6.4 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to 10 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to 32 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to fifty kb/s
to boundary the bandwidth EIGRP packets tin give notice work to 6.4 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to 10 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to 32 kb/s
to boundary the bandwidth EIGRP packets tin give notice work to fifty kb/s
45. Influenza A virus subtype H5N1 network administrator adds the default-information originate command to the configuration of a router that uses RIP equally the routing protocol. What volition number from adding this command?
The router volition hold out reset to the default mill information.
The router volition non frontwards routing information that is learned from other routers.
The router volition propagate a static default route inward its RIP updates, if 1 is present.
The router volition solely frontwards packets that originate on straight connected networks
The router volition hold out reset to the default mill information.
The router volition non frontwards routing information that is learned from other routers.
The router volition propagate a static default route inward its RIP updates, if 1 is present.
The router volition solely frontwards packets that originate on straight connected networks
46. Influenza A virus subtype H5N1 network technician is configuring a Cisco 2811 router. The technician types conf at the privileged degree command prompt in addition to presses the TAB key. What activeness volition the router take?
It volition revert to the user mode.
It volition perform an auto-complete function.
It volition perish into the global configuration mode.
It volition give an mistake message that indicates a bad command was entered
It volition revert to the user mode.
It volition perform an auto-complete function.
It volition perish into the global configuration mode.
It volition give an mistake message that indicates a bad command was entered
47. What is a role of the console port on a router?
It is used to create produce the router.
It is used for parcel receiving in addition to forwarding.
It is used to interconnect diverse types of LANs.
It is used to interconnect a diverseness of series links including T1, DSL, in addition to ISDN
It is used to create produce the router.
It is used for parcel receiving in addition to forwarding.
It is used to interconnect diverse types of LANs.
It is used to interconnect a diverseness of series links including T1, DSL, in addition to ISDN
48. Refer to the exhibit. Which route volition hold out installed inward the routing tabular array on R1 to frontwards traffic from PC1 to the spider web server?
the static route
the route learned via OSPF
the route learned via EIGRP
both routes learned via OSPF in addition to EIGRP
the static route
the route learned via OSPF
the route learned via EIGRP
both routes learned via OSPF in addition to EIGRP
49. Refer to the exhibit. After the commands are entered, which password volition hold out required to found a Telnet session
with the router?
cisco
letmein
please
access
with the router?
cisco
letmein
please
access
It may hold out backed upwards past times a viable successor route.
It is used past times EIGRP to frontwards traffic to the destination.
