Configuring An Access Indicate Every Moment A Wireless Repeater

The Linksys Wireless-G Access Points tin flaming hold upwards configured every bit an Access Point, Access Point Client, Wireless Repeater, as well as Wireless Bridge. The Wireless Repeater trend volition plough the access scream for into a wireless repeater to extend the hit of your signal.                     

 

The WAP54G volition function every bit a wireless repeater amongst the next devices:

• Linksys Wireless-G Access Point (WAP54G)
• Linksys Wireless-G Router (WRT54G) 

To configure the access scream for every bit a wireless repeater, you lot take away to perform 2 steps:

1. Checking the Wireless MAC Address of a Wireless Router/Access Point
2. Setting-Up Wireless Repeater Mode on the WAP54G  

Checking the Wireless MAC Address of a Wireless Router 
NOTE:  If you lot volition connect the wireless repeater to unopen to other WAP54G, click here. To banking concern agree the wireless MAC Address of the wireless router follow the steps below.  

Step 1:Access the router’s web-based setup page. For instructions, click here.
NOTE: If you lot are using Mac to access the router’s web-based setup page, click here.
Step 2:When the router’s web-based setup page opens, click Status as well as thence click Wireless.

Step 3:Take complaint of the MAC Address. This is your router’s wireless MAC address.

NOTE: The Wireless MAC Address you lot took complaint of volition hold upwards entered on the WAP54G fix every bit wireless repeater. After checking the wireless MAC Address, set-up the wireless repeater trend on the WAP54G. For instructions, click here. To banking concern agree the wireless MAC address of the access point, follow the steps below.
 

Checking the Wireless MAC Address of an Access Point

Step 1:Connect a calculator to the access point.

Step 2:Assign a static IP address on the computer. For instructions, click here.
NOTE: To assign a static IP address on a wired Mac, click here.
Step 3:Open the access point’s web-based setup page. For instructions, click here.
NOTE: If you lot are using Mac to access the access point’s web-based setup page, click here.
Step 4:When the access point’s web-based setup page opens, stimulate got complaint of the Wireless MAC Address.

NOTE: The Wireless MAC Address you lot took complaint of volition hold upwards entered on the WAP54G fix every bit wireless repeater. 
Step 5:After obtaining the wireless MAC address of the router/access point, configure the other WAP54G every bit a wireless repeater. For instructions, follow the steps below.

Setting-Up Wireless Repeater Mode on the WAP54G
Step 1:Access the access point’s web-based setup page. For instructions, click here.
NOTE: If you lot are using Mac to access the access point’s web-based setup page, click here.
Step 2:When the access point’s web-based setup page opens, click AP Mode as well as thence choose Wireless Repeater.


NOTE: The access point’s web-based setup page may differ depending on the access point’s version number.
Step 3:Type the wireless MAC address you lot took complaint of before inwards the Remote Access Point’s LAN MAC Address field.


NOTE: Remove the colons (:) when typing the MAC address on the Remote Access Point’s LAN MAC Address field.
Step 4:
Click .